Lakhovsky pulser

[Widur]

Since I have not yet the resistance I need to closely copy ghettos pulser, Ill try the other thing first and simulate what Lakhovsky did. I dont ocme into his high frequency and voltage, but its a kind of lakhovsky light. It makes short hard spikes as Lakhovsky wanted and not a soft pulsed dc field like ghettos pulser, which Ill try next.
I first try it on growing plants, seeds will come later. Its a little something along the line.
Who knows, maybe I got luck and it works!
Here the first test.
If I put the pulse module to 80hz and 1% duty and the power supply to 12v 2a it gives good 12v and 0.7a.
After a while the power supply starts its venti.
It buzzes all time and is always in cv or cc!
Is everything allright? I hope it will speed up the plants grow.
Ill run it every day for 10 minutes. Then more often. Lets see.

 

[Widur]

I am doing it every day.
I think they started to grow stronger than the rest, but it could be cause of the bigger pot.
But then, Ive transplanteed some to the garden today and they have not half filled the pot with roots, so it shouldnt matter.I let the pulser run wvery day for 10-15 minutes in the morgens and will keep doing so. Lets see if we can see an effect.

 

[Widur]

Think they grow a bit faster than the rest.
Dialed numbers up to 16v 2 a from today on.
As close as you come to lakhovsky as it gets with that device!
But nothing much to do with what ghetto does, much shorter pulses, harder spikes!
Ghettos stuff, which is more pulsed dc magnetic field, I will try next!
Pics coming soon.

 

[Widur]

More pics, I think it works,
the plants not being in front of the pulser are slower.
But to be sure I changed the plants.
I know its no real test, but at the moment enough for me.
Heres how they looked yesterday.

 

[Widur]

Now I try it on different plants.

 

[Widur]

I Held my Hand 10 cm in front of the pulser and felt a very diffuse but unpleasent buzz.
was it an imagination?
But it was to unpleasant to take chances.
Lakhovskys pulser destroid cancer, but radiation does too.
AI says it was induced power at nerves, so the buzz, but not bad at this strength!
I was only feared I think.
Now I know it works.
Id be nice to know how your pulser feels with your numbers when held before hand @ghetto alchemist ??
Although KI says you shouldnt do it. Its too strong, you would feel a numb vibration and warmth even probably, so careful.
Maybe your power supply somehow cuts the amperage or such so its alright as you say, but it seems much.
Maybe you just wanna try my numbers, just for kicks?
Ill try yours on plants soon, but on ones I dont need so much!

 

[ghetto alchemist]

Id be nice to know how your pulser feels with your numbers when held before hand @ghetto alchemist ??

I can't feel my pulser at all when it's running.
The only way I ever know is actually running is because of the clicking sound, otherwise I'd have no idea.

Maybe your power supply somehow cuts the amperage or such so its alright as you say, but it seems much.

I think the power going into the coil, in reality, is far less than what I said it is.

Maybe you just wanna try my numbers, just for kicks?

Thanks for your help in trying to understand better and improve the design, but TBH I think my current coil and pulser is already perfect just as it is.
Any settings that increase power in my coil, will only make it overheat and quickly become unuseable,

 

[mishava]

Does it work on Lou Gehrig's disease aka ALS aka motor neuron disease ?

 

[Widur]

Poor Ross the Boss died from ALS recently, 2nd time I heard ALS in my live in some days, weird coincidence.
I only know it works on cancer.
Its said to influence infections, give vitality, makes wounds heal faster, plants grow faster, etc.
But the lakhovsky pulser and lakhovsky coil are quite different from what I and ghetto have.
The pulser is concentric rings with a spark gap.
It resonates all kinds of waves, from kHz to GHz!
Like for radio or handy.
In extremely short spikes.
What we have cant do that!
We have a pulsed magnetic field. Something different.
But with my shorter pulses and harder spikes I send at least some waves from kHz to MHz!
Nowadays you dont need high voltage and spark gap like lakhovsky,
better was white noise generator or hf generator.
You just dont have the spikes, but lakhovsky just needed them to generate HF!
I just to around with some in between thing, just to look what happens.
Try it!
Only thing you can do is try.

 

[mishava]

Poor Ross the Boss died from ALS recently, 2nd time I heard ALS in my live in some days, weird coincidence.
I only know it works on cancer.
Its said to influence infections, give vitality, makes wounds heal faster, plants grow faster, etc.
But the lakhovsky pulser and lakhovsky coil are quite different from what I and ghetto have.
The pulser is concentric rings with a spark gap.
It resonates all kinds of waves, from kHz to GHz!
Like for radio or handy.
In extremely short spikes.
What we have cant do that!
We have a pulsed magnetic field. Something different.
But with my shorter pulses and harder spikes I send at least some waves from kHz to MHz!
Nowadays you dont need high voltage and spark gap like lakhovsky,
better was white noise generator or hf generator.
You just dont have the spikes, but lakhovsky just needed them to generate HF!
I just to around with some in between thing, just to look what happens.
Try it!
Only thing you can do is try.

who is Ross the boss?

 

[Widur]

Co-founder of Manowar and member of several good bands, especially Manowar.

 

[Widur]

The lakhovsky light adjustment dosnt seem to help plant growth.
Thats em today, they didnt grow much!
Ill switch from lakhovsky light to @ghetto alchemist's dc pulser.
Just have to change numbers and build in an 1ohm resistor in plus line to sumulate the dumb Laptop Power supply with lab power supply but dont ask me why, I worked it out with AI help.So lets see if itll get better for plants.

Apart from that its absolutely possible today to build a lakhovsky pulser quite cheap with different parts!
We got better stuff than spark gaps today!

 

[Widur]

Im doing a comparision of ghetto dc pulser vs. control. Control is bigger so I should be able to overtake it.

 

[Widur]

Till now ghetto's dc pulser doesnt seem to help with plants also...well, they got no nerves, but we thought it has to do with HIM.
I have to do a real Lakhovsky setup, but I dont know when to do that also!

 

[Widur]

Since the experiments didnt show any results, I turned the coil around, now trying negative pole, with the dc pulser numbers from ghettoalchemist.
In electroculture lots of people think + is more beneficial,
while ghetto tends to think - adds life force, + can suck it off.
Or at least I think to remember having read this in his dc pulser thread.

Well, lets see.
If this doesnt work I go back to my Lakhovsky light numbers, then, working or not, Ill try a new versus experiment, although I think it cant be the earth!

 

[ghetto alchemist]

Till now ghetto's dc pulser doesnt seem to help with plants also...well, they got no nerves, but we thought it has to do with HIM.

IMO the pemf pulser energises the HIM component in blood cells to stimulate faster healing and stronger immune response.
So while plants do have HIM, they don't have anything like white blood cells.

while ghetto tends to think - adds life force, + can suck it off.
Or at least I think to remember having read this in his dc pulser thread.

Actually I didn't originally think that....I only accepted the answer that - pushes and + pulls, because you said so based on your experimental results!
So if that's correct, then it's because it was based off real results and needs no further explanation or discussion...but if it's wrong, then that one's on you brother.

 

[Widur]

Actually I didn't originally think that....I only accepted the answer that - pushes and + pulls, because you said so based on your experimental results!
So if that's correct, then it's because it was based off real results and needs no further explanation or discussion...but if it's wrong, then that one's on you brother.

No, no, I thought you wrote that somewhere in your magnetic pulser thread!
KI told me!
Wrong?

I didnt say or think so, I just dont know.

Exactly, I said pushing and pulling, pulling (+) CAN under certain circumstances pull the HIM off I think.
But pulling is + !!! Not minus!

Short: + pulls and manifests, makes it go in water
- pushes and aetherises, makes it go in air
But for example plus cant pull through air, only through water.
Ive just put down all actual knowledge in my thread, you became a link in your message box!

Minus aetherises, makes HIM go into air(I think)!
So it can make HIM gas off!
Its all about circumstances, both + and - can be good OR bad!
But then I am not sure if its really push and pull or if its a rotation through the mag field!
Meaning - pushes it and it moves with the field lines but in different direction(energy moves from plus to minus, right?) to plus pole, then either staying there or moving through the mag back to minus, starting rotation again.
But theres definetely a better collection at plus pole, but maybe just cause
if the minus pole pushes it away, there is air and other mags in my construction taking it away!

 

[Widur]

Since nothing was successful on plants, Il go on the water the plants are in now. Means Ive put the dc pulser, with 10% duty and 16 pulses per second, below a dwc system. Its like 5cm under the water, there it gives a reading of over 250, like 5 times earth's mag field.
Should be enough to break down water clusters, make ions more available by stealing their hydration shell and same for chelates. So should be good for plants. I have all these overly big cuttings, since I had to cut the tomatoes back in my greenhouse, they grew un the condensation chamber where they should not be. So they all dont catch enough water. Maybe theyll do now. Tomorrow Ill turn of for an hour to check ph and ec. Then turn back on and check for differences.
If it doesnt work, Ill put the pulser below my hydoponic bubble cloner, a DWC for cuttings. There it would be much closer to the water.

 

[Widur]

I cant realy see difference in rooting here, but they all root good. But what to compare with? Thats why I cant see difference. So Ill put the pulser below my bubbler propagator to have a comparison off before and after! Its that thing bottom and left of the pic!